What are the test media of the air tightness tester, and can air also do waterproof test?

Airtightness TesterIt is an important piece of equipment in the manufacturing industry that helps companies ensure the quality and safety of their products. It isInstruments and equipment used to detect whether there is leakage of various seals, containers, pipelines, etc., by filling the product under test with gas or liquid and judging the sealing performance by detecting the amount of leakage.The name is also used to refer to theAir tightness test equipment,Waterproof Tester,airtightness leak detector,Sealing TesterThe

Air tightness tester is widely used in industrial manufacturing, including new energy, household appliances, auto parts, consumer electronics, medical devices, security lighting, valves and pipes, wire connectors and other industries.

Ⅰ.The purpose of the airtightness test is to

- Test whether the airtight design of the product is reasonable.

- Check that the product's interfaces and joints are completely airtight.

- Evaluate the ability of the product to meet the corresponding IP protection rating.

- Ensure airtightness and protection of the product during use.

Ⅱ.The main types of test methods are as follows

1. Differential pressure method:The product to be measured is placed in an airtight container, filled with gas or liquid, and the difference in pressure between the inside and outside of the container is detected; the differential pressure method is also called the pressure drop method.
2. Vacuum attenuation method:The product under test is placed in a vacuum environment to detect the amount of gas or liquid leakage inside the product under test, the vacuum attenuation method is also called the negative pressure method.
3. Helium leak detection method:Helium is injected into the product under test and a helium leak detector is used to detect the amount of helium leakage inside the product under test, also known as helium leak detection.

III.Airtightness TesterTest Media

Airtightness TesterThere are two main types of test media: gases and liquids.

Gas test media have the advantage of higher sensitivity, but require the use of auxiliary equipment such as vacuum pumps, which are more costly.

Commonly used gaseous test media include air, nitrogen, helium, and so on. Compressed air is one of the most commonly used gas test media and has the advantage of being easy to obtain and inexpensive. Nitrogen is an inert gas with good permeability and can be used to detect small leaks. Helium is a light gas with high permeability and can be used to detect objects with good sealing properties.

flat panel displayAirtightness TesterTest medium: compressed air

Liquid test media have the advantage of being easily accessible and inexpensive, but have poor sensitivity.

Liquid test media are commonly used, such as water, oil, solvents and so on. Water is a commonly used liquid test medium, its advantage is easy to obtain, low cost. Oil has good adhesion, can be used to detect irregular objects on the sealing surface. Solvent has good solubility, can be used to detect the sealing surface of the presence of dirt or debris objects.

Automotive Filter ElementWater tightness testerTest medium: water

IV.Summarize

Airtightness testing is very important for product quality control, in the selection of theAirtightness TesterWhen you do this, it needs to be determined based on the type of product being tested, the test medium, the test accuracy, and other factors.

If you need to use a professionalAir tightness testing equipmentto make accurate measurements and evaluate the sealing waterproofness of the product. In this regard, we recommend you to choose the following two brands:

made in Chinaairtightness leak detectorSelect JCGK:JCGK is a dynamic and innovative domestic science and technology enterprise, whoseAir tightness testing equipmentCharacterized by high efficiency, high intelligence and high flexibility, it follows the market demand closely and provides customers with comprehensive sealing solutions, and is the leader and pioneer in the field of domestic airtightness testing.

inletairtightness leak detectorSelect ATEQ:ATEQ Adeche is an internationally recognized company with a history of nearly 50 years.Airtightness testing equipmentCharacterized by high precision, high stability and high reliability, it is widely used in various industries and is the leader and benchmark in the field of imported airtightness testing.